Customer Service M-F 8am-7pm
1-888-695-7994
One of our sales reps is standing by to help with any questions you may have about the parts we sell.

Alternators

A device used to transform mechanical energy into electrical energy is actually called an alternator. It can perform this function in the form of an electric current. An AC electrical generator could basically also be termed an alternator. Then again, the word is typically utilized to refer to a rotating, small device powered by internal combustion engines. Alternators that are situated in power stations and are powered by steam turbines are actually referred to as turbo-alternators. The majority of these devices make use of a rotating magnetic field but at times linear alternators are also utilized.

A current is generated within the conductor if the magnetic field all-around the conductor changes. Normally the rotor, a rotating magnet, spins within a set of stationary conductors wound in coils. The coils are located on an iron core referred to as the stator. When the field cuts across the conductors, an induced electromagnetic field or EMF is generated as the mechanical input causes the rotor to revolve. This rotating magnetic field produces an AC voltage in the stator windings. Normally, there are 3 sets of stator windings. These physically offset so that the rotating magnetic field produces 3 phase currents, displaced by one-third of a period with respect to each other.

"Brushless" alternators - these make use of slip rings and brushes together with a rotor winding or a permanent magnet so as to induce a magnetic field of current. Brushlees AC generators are usually found in bigger devices like for example industrial sized lifting equipment. A rotor magnetic field can be produced by a stationary field winding with moving poles in the rotor. Automotive alternators normally utilize a rotor winding which allows control of the voltage produced by the alternator. This is done by changing the current in the rotor field winding. Permanent magnet machines avoid the loss because of the magnetizing current within the rotor. These devices are restricted in size due to the cost of the magnet material. As the permanent magnet field is constant, the terminal voltage varies directly with the generator speed.

Click to Download the pdf



Forklift Masts and Parts

  • Brakes
    A brake drum is wherein the friction is supplied by the brake shoes or brake pads. The shoes or pads press up against the rotating brake drum. There are some different brake drums kinds along with certain specific differences. A "break drum" ...
    More
  • Carriage Rollers
    Carriage rollers are particularly designed bearings that are utilized on lift masts in order to help them function within tough environmental surroundings. Lift masts are often subjected to oscillations, shocks, high dynamic and vibrations and ...
    More
  • Carriages and Carriage Parts
    There are 4 sizings of hook type tine carriages rated by the fork carriage lifting capability. Hook type tine carriages have been standardized. The carriage bar spacing used for Class 1 is something like thirteen inches and the Class 1 ...
    More
  • Control Valves
    Automatic control systems were first developed more than two thousand years ago. The ancient water clock of Ktesibios in Alexandria Egypt dating to the 3rd century B.C. is believed to be the first feedback control equipment on record. This ...
    More
  • Controllers
    Lift trucks are obtainable in several various models that have different load capacities. Most standard forklifts used inside warehouse settings have load capacities of 1-5 tons. Larger scale units are used for heavier loads, like loading ...
    More
  • Differentials
    A mechanical tool which can transmit torque and rotation through three shafts is known as a differential. Every now and then but not all the time the differential would utilize gears and will function in two ways: in cars, it receives one input ...
    More
  • Drive Axles
    A forklift drive axle is a piece of machinery which is elastically affixed to a vehicle frame utilizing a lift mast. The lift mast is fixed to the drive axle and can be inclined round the axial centerline of the drive axle. This is done by at the ...
    More
  • Drive Motors
    MCC's or likewise known as Motor Control Centersare an assembly of one section or more which include a common power bus. These have been utilized in the vehicle business since the 1950's, since they were utilized many electric motors. Today, they ...
    More

Lift Parts Express

We are here to provide you with the best service and sales support for all your lift truck parts needs. Our devotion to excellence is what sets us apart from our competition. For more information give us a call today at:

TOLL FREE: 1-888-695-7994


www.forkliftmastscalifornia.com

Email Us



Our business objective is to ensure every customer we serve is content with the parts or attachments they are given. One of our major competitive advantages is that we can generally match or beat...   About Us