Forklift Gears

Among the more common kinds of pump used for hydraulic fuel power applications is the gear pump. The gear pump operates by using the meshing gears to pump fluid by displacement. These devices are likewise commonly utilized in order to pump fluids with specific velocities in chemical installations. Two basic types of gear pumps exist. Internal gear pumps use an an internal and an external spur gear and external gear pumps utilize two external spur gears. Gear pumps pump a continuous amount of fluid for each and every revolution. This defines them as fixed or positive displacement. Several gear pump machines are designed to work as either a motor or a pump.

While the gears on the pump rotate, they divide on the intake side of the pump. This creates a void and suction that is filled by fluid. This fluid is carried by the gears to the discharge side of the pump, and this is whereby the meshing of the gears works to be able to displace the fluid. There are tight and very small mechanical clearances, which together with the speed of rotation effectively prevent the fluid from leaking backwards. The rigid design of the gears and houses provides the pump its ability to be able to pump highly viscous liquids and allow for extremely high pressures.

Click to Download the pdf

Forklift Masts and Parts

Sort by: Parts | Attachments | Parts By Brand

• 
  Alternators
  

  A device used to transform mechanical energy into electrical energy is actually called an alternator. It can perform this function in the form of an electric current. An AC electrical generator could basically also be termed an alternator. Then ...

  More
• 
  Brakes
  

  A brake drum is wherein the friction is supplied by the brake shoes or brake pads. The shoes or pads press up against the rotating brake drum. There are some different brake drums kinds along with certain specific differences. A "break drum" ...

  More
• 
  Carriage Rollers
  

  Carriage rollers are particularly designed bearings that are utilized on lift masts in order to help them function within tough environmental surroundings. Lift masts are often subjected to oscillations, shocks, high dynamic and vibrations and ...

  More
• 
  Carriages and Carriage Parts
  

  There are 4 sizings of hook type tine carriages rated by the fork carriage lifting capability. Hook type tine carriages have been standardized. The carriage bar spacing used for Class 1 is something like thirteen inches and the Class 1 ...

  More
• 
  Control Valves
  

  Automatic control systems were first developed more than two thousand years ago. The ancient water clock of Ktesibios in Alexandria Egypt dating to the 3rd century B.C. is believed to be the first feedback control equipment on record. This ...

  More
• 
  Controllers
  

  Lift trucks are obtainable in several various models that have different load capacities. Most standard forklifts used inside warehouse settings have load capacities of 1-5 tons. Larger scale units are used for heavier loads, like loading ...

  More
• 
  Differentials
  

  A mechanical tool which can transmit torque and rotation through three shafts is known as a differential. Every now and then but not all the time the differential would utilize gears and will function in two ways: in cars, it receives one input ...

  More
• 
  Drive Axles
  

  A forklift drive axle is a piece of machinery which is elastically affixed to a vehicle frame utilizing a lift mast. The lift mast is fixed to the drive axle and can be inclined round the axial centerline of the drive axle. This is done by at the ...

  More