Customer Service M-F 8am-7pm
1-888-695-7994
One of our sales reps is standing by to help with any questions you may have about the parts we sell.

Truss Booms

Truss boom's could be utilized in order to pick up, transport and position trusses. The attachment is designed to operate as an extended boom attachment with a triangular or pyramid shaped frame. Typically, truss booms are mounted on equipment like for instance a compact telehandler, a skid steer loader or a forklift using a quick-coupler accessory.

Older kind cranes that have deep triangular truss booms are normally assemble and fastened with bolts and rivets into standard open structural shapes. There are rarely any welds on these kind booms. Each and every riveted or bolted joint is prone to rusting and therefore needs frequent upkeep and inspection.

A general design attribute of the truss boom is the back-to-back assembly of lacing members. These are separated by the width of the flange thickness of an additional structural member. This design can cause narrow separation among the smooth exteriors of the lacings. There is little room and limited access to clean and preserve them against rusting. Lots of rivets loosen and rust inside their bores and should be replaced.

Click to Download the pdf



Forklift Masts and Parts

  • Alternators
    A device used to transform mechanical energy into electrical energy is actually called an alternator. It can perform this function in the form of an electric current. An AC electrical generator could basically also be termed an alternator. Then ...
    More
  • Brakes
    A brake drum is wherein the friction is supplied by the brake shoes or brake pads. The shoes or pads press up against the rotating brake drum. There are some different brake drums kinds along with certain specific differences. A "break drum" ...
    More
  • Carriage Rollers
    Carriage rollers are particularly designed bearings that are utilized on lift masts in order to help them function within tough environmental surroundings. Lift masts are often subjected to oscillations, shocks, high dynamic and vibrations and ...
    More
  • Carriages and Carriage Parts
    There are 4 sizings of hook type tine carriages rated by the fork carriage lifting capability. Hook type tine carriages have been standardized. The carriage bar spacing used for Class 1 is something like thirteen inches and the Class 1 ...
    More
  • Control Valves
    Automatic control systems were first developed more than two thousand years ago. The ancient water clock of Ktesibios in Alexandria Egypt dating to the 3rd century B.C. is believed to be the first feedback control equipment on record. This ...
    More
  • Controllers
    Lift trucks are obtainable in several various models that have different load capacities. Most standard forklifts used inside warehouse settings have load capacities of 1-5 tons. Larger scale units are used for heavier loads, like loading ...
    More
  • Differentials
    A mechanical tool which can transmit torque and rotation through three shafts is known as a differential. Every now and then but not all the time the differential would utilize gears and will function in two ways: in cars, it receives one input ...
    More
  • Drive Axles
    A forklift drive axle is a piece of machinery which is elastically affixed to a vehicle frame utilizing a lift mast. The lift mast is fixed to the drive axle and can be inclined round the axial centerline of the drive axle. This is done by at the ...
    More

Lift Parts Express

We are here to provide you with the best service and sales support for all your lift truck parts needs. Our devotion to excellence is what sets us apart from our competition. For more information give us a call today at:

TOLL FREE: 1-888-695-7994


www.forkliftmastscalifornia.com

Email Us



Our business objective is to ensure every customer we serve is content with the parts or attachments they are given. One of our major competitive advantages is that we can generally match or beat...   About Us